Customization: | Available |
---|---|
Type: | Flat Gasket |
Material: | Stainless Steel |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Double metal jacketed corrugated gasket.
This double-jacketed corrugated gasket can be an advancement over a basic jacketed gasket in that the particular corrugations on the gasket can provide another labyrinth seal. In addition, it delivers the advantage of lowering the contact section of the gasket, maximizing its compressive attributes. A double metal jacketed corrugated gasket still depends on the actual primary seal on the inside lap.Double jacketed corrugated gasket with corrugated metal filler.
With temperature conditions in excess of your range of 900° F to 1000° F in which the standard soft filler will be normally not recommended, a double jacketed corrugated metallic gasket with a corrugated stainless steel filler might be effective. This unique style offers the advantages of the double jacketed corrugated metal gasket and, in addition, considering that the filler is normally the same material since the gasket itself, the upper temperatures limit will be based upon the steel being utilized. This particular type of gasket, based upon steel preferred, is specially designed to turn into a heat exchanger gasket for high stress, large temperature applications.Double metal jacketed double shell gasket.
The double jacketed and double shelled gasket will be similar to the double jacketed gasket except that it has a shell and also a washer, 2 shells are usually utilized in the production of the gasket. They have the benefits of a double lap at the two inner diameter as well as the outer diameter of the gasket, placing better stableness to the gasket. This design will hold up against greater compressive loads. Double metal shell gaskets are normally tied to utilize in high stress programs.Single metal jacketed overlap gasket.
In the single jacketed overlap gasket structure the maximum flange width will be approximately 6.4 mm. this type of gasket is utilized when total enclosure on the soft filler material is definitely required and when the flange width causes it to be unrealistic to use a double jacketed gasket.
And all the types of metal jacketed gasket can be made with metal ribs.